Stability of new-generation semiconductor lasers
Semiconductor lasers are ubiquitous in everyday applications ranging from the Internet to medicine. Practically every laser application is affected by laser speed and stability properties. Stable operation is important for spectroscopy and optical clocks, while high-speed response is essential for optical communication schemes. When coupled to the outside world, or to one another (as in photonic integrated circuits), conventional semiconductor lasers often undergo instabilities that give rise to irregular and unpredictable oscillations in the intensity of the emitted light.1–3 These chaotic oscillations occur on a timescale of tens to hundreds of picoseconds and underpin modern laser applications, including instability-based sensing,4, 5 chaos-based secure optical communication,6 as well as ultrafast information processing,7 and random-number generation.8 Therefore, proper understanding of laser instabilities is of great importance for applications.
We have employed modern mathematical concepts to investigate the affect of active-medium polarization dynamics on laser stability. We demonstrate, for the first time and contrary to general belief, that the additional degrees of freedom afforded by the active-medium polarization dynamics may stabilize a laser. These findings are intriguing yet robust as they occur over a wide range of operating conditions and design parameters. They also impact on a new generation of semiconductor light emitters.
To understand why our results are counterintuitive, consider a solitary laser without any external disturbances. The three dynamical variables provide enough degrees of freedom for the ultimate instability. Indeed, chaotic dynamics akin to the famous ‘butterfly effect’12 were predicted and demonstrated in an experiment with a solitary IR ammonia laser.13 Such instability is no longer possible following adiabatic elimination of the active-medium polarization, because of insufficient degrees of freedom. Hence, one may jump to the conclusion that additional degrees of freedom, arising from the active-medium polarization dynamics, generally destabilize the laser. Our work shows that an opposite, stabilizing effect is also possible. To illustrate the stabilizing effect, we analyze the laser response to external disturbances, using a combination of traditional stability analysis and modern mathematical concepts of shear-induced instability.14 We view a laser device as a nonlinear oscillator whose natural frequency depends on the magnitude of E(t), P(t), or N(t). This effect is known as amplitude-phase coupling, self-phase modulation, or simply shear.
In conventional semiconductor lasers, shear can be quantified by a single parameter, the linewidth enhancement factor, which is related to the detuning between the optical-resonator mode frequency and the active-medium transition frequency. To illustrate, let the stable constant-intensity lasing state—the red periodic orbit in Figure 1(a)—be disturbed. The initial disturbance—the black curve in Figure 1(a)—rotates about the origin of the complex E-plane and relaxes back to the stable lasing state over time. Without shear, the dynamics are simple: every disturbance point rotates at the same frequency as the stable lasing state, meaning that the disturbance curve relaxes back to the undisturbed circular shape: see the black curve in Figure 1(b). However, this is not the case in the presence of shear: see Figure 2. Shear causes higher-intensity disturbances to rotate faster, and lower-intensity disturbances to rotate slower, relative to the stable lasing state, which means that the disturbance curve is stretched along the lasing state. Concurrent relaxation of the disturbance back to the stable lasing state creates folds in the disturbance curve: see Figure 2(a). The ensuing dynamics are rather complex, i.e., they involve the stretch-and-fold action, which is a hallmark of chaotic dynamics.
In the new generation of semiconductor lasers, where the active-medium polarization dynamics play a role, shear is much less understood and may no longer be quantified by a single parameter.15 Moreover, we have shown that, rather surprisingly, the additional degrees of freedom may suppress the stretch-and-fold action. The response to the disturbance in Figure 2(b) exhibits some stretching and folding but to a far lesser extent than in conventional semiconductor lasers. Guided by this observation, we demonstrated that polarization dynamics can suppress externally induced instabilities for two canonical laser configurations in nonlinear laser studies: a laser with external optical injection and a laser with time-delayed optical feedback.16
Recent technological advances in semiconductor lasers give reason for revisiting the effects of active medium polarization dynamics on laser stability. It has been known since the 1980s that polarization dynamics may destabilize a laser into chaos, although this requires special laser design. We have now demonstrated that an opposite, stabilizing effect is possible over a wide range of design parameters. Next, we will investigate the stabilizing mechanism in more detail to better understand its impact on a new generation of semiconductor lasers.
Sebastian Wieczorek is a professor (chair) of applied mathematics.
Kevin Synnott is an undergraduate mathematics student.
Weng Chow is a distinguished member of the technical staff.